Amplifiers Pride Apollo
Practical, reliable, easy to use this car amplifier model combines this and much more. You cant do without an amplifier if you want to connect powerful speakers, a subwoofer, or run a 2 or 3-way system. Thanks to it, you can enjoy loud and high-quality music in your car.
1-channel power amplifier Pride Apollo 5000W. Suitable for subwoofer up to 5000 Watts RMS.
This model will be an excellent choice in systems where 3-4 speakers are installed, for example, Pride HP / MT series, or a pair of Pride Tv.3 / Sv.3 speakers
The rated power of the Pride Appolo is 5,000 watts per 1 ohm load, at a voltage of 14.4 V and a distortion level of the output signal of 1%.
It can work both in bridge mode and in array mode (link). Without fear, it is possible to connect to a load with a resistance of 0.5 Ohms if it is a subwoofer speaker whose DC resistance of the voice coils is not lower than the indicated mark.
Range of reproduced frequencies, Hz 15 270
RMS rated power of 1 ohm, number of channels x W 2 x 5000
RMS rated power of 2 ohms, number of channels x W 4 x 3000
RMS rated power at 4 ohms, number of channels x W 4 x 1700
Developed and designed on the basis of Korean Circuitry with the completion of Russian engineers.
Excellent solution for powerful subwoofers and high-quality sound for many years of work.
Buy it now and enjoy the power of sound by Pride Car Audio!
Part number:APL.50
| Technical feature |
| 1 Ohm Power |
5000 W |
| 2 Ohm Power |
3000 W |
| 4 Ohm Power |
1700 W |
| Frequency Response |
15Hz – 270 Hz |
| Signal to Noise |
85 dB |
| Efficiency @ 4ohm |
Over 90% |
| Damping Factor |
> 200 |
| Input Sensitivity |
6V-0,2V |
| Subsonic Filter |
10 Hz – 50 Hz |
| Bass Boost |
0-9 dB |
| Remote Control with indication of exceeding the distortion |
Included |
| Low Pass Filter |
35 Hz – 250 Hz |
| Phase |
0-180 degree |
| Strap Connection |
Yes |
| Fuse Rating |
450 A |
| Physical feature |
|
| Length |
560 mm/22″ |
| Height |
66 mm/2,6″ |
| Width |
220 mm/8,6″ |
| Color |
Black |