Tesla Model S Plaid Facelift II Pre-Preg Carbon Fibre Side Skirts by Adro (2021+)

Description

ADRO Pre-Preg Carbon Fibre Side Skirts for Tesla Model S Facelift II (2021+)

The Model S has always been defined by its profile | long, low and uninterrupted. ADRO’s Carbon Fibre Side Skirts are designed to lean into that silhouette rather than fight it. Running the full length of the rocker panels, they extend the lower bodyline, drop the visual ride height and pull the car closer to the road without crossing into territory that reads as aftermarket.

The skirts are produced in genuine pre-preg carbon fibre with a 2×2 twill weave that is matched left-to-right and front-to-back. Autoclave curing under heat and pressure produces a part that is lighter and stiffer than wet-laid carbon, with a deeper, more uniform gloss. The weave on the driver’s side mirrors the passenger side exactly | a detail that registers clearly when the car is viewed under direct light.

Fitment was developed from a full 3D scan of the Model S body, ensuring the skirts hug the rocker panel contour from the front wheel’s leading edge to the rear wheel’s trailing edge. No flex, no gapping, no interpretation required during installation. Functionally, the extended profile manages the high-pressure air that would otherwise spill under the car along the sides, improving stability and planted feel through fast sweeping corners.

Key Features:

• Pre-preg carbon construction | autoclave-cured for superior strength-to-weight and weave consistency
• 3D-scanned OEM fitment | contoured to the actual Model S body for zero gap, no trimming required
• CFD-developed profile | extended rocker geometry that manages side-body airflow at speed
• Matched weave, full length | left and right panels mirror each other precisely end to end
• Supplied as a pair (LH + RH) with 3M adhesive tape and mounting hardware

What’s in the box:

• 1 x Pair of ADRO Carbon Fibre (pre-preg, 2×2 weave) Side Skirts (LH + RH)
• 3M Adhesive Tape
• Mounting Hardware

Fitment / Compatibility

NOTE: Not compatible with pre-2021 Model S. Confirm body revision with team if unsure.

FAQs

Q: What years of Tesla Model S do these side skirts fit?

A: These side skirts are confirmed for the Tesla Model S Facelift II (20212025), covering both the Model S Long Range and Model S Plaid with the refreshed body introduced in 2021. They are not compatible with the pre-2021 Model S.

Q: Are the left and right skirts supplied as a pair?

A: Yes. The set includes one left-hand skirt and one right-hand skirt. The weave pattern is mirrored between the two panels for perfect symmetry when viewed on the car.

Q: How are the side skirts installed?

A: Installation uses 3M automotive adhesive tape and mounting hardware, both included in the box. The 3D-scanned fitment means the skirts align to the rocker panel contour without any trimming, drilling or shimming. Professional installation is recommended to ensure correct surface preparation and optimal adhesive bond.

Q: Do the ADRO side skirts provide a functional aerodynamic benefit?

A: Yes. The extended rocker profile manages high-pressure airflow along the car’s sides, reducing the amount of air that spills under the car. This contributes to improved aerodynamic stability and a more planted feel, particularly in fast sweeping corners and at motorway speeds.

Q: Will these side skirts affect ground clearance significantly?

A: The skirts extend the lower bodyline but are designed to maintain adequate ground clearance for normal road use. ADRO developed the profile from 3D scan data of the actual Model S body to balance visual impact with practical usability.

Q: Can these be removed cleanly if required?

A: Yes. The 3M tape bond can be released by carefully working dental floss or fishing wire along the adhesive line. Adhesive remover (IPA) cleans any residue. Contact our team for detailed removal guidance.

{ “@context”: “https://schema.org”, “@type”: “FAQPage”, “mainEntity”: [ { “@type”: “Question”, “name”: “What years of Tesla Model S do the ADRO carbon side skirts fit?”, “acceptedAnswer”: { “@type”: “Answer”, “text”: “The ADRO carbon side skirts fit the Tesla Model S Facelift II (2021-2025), covering both Long Range and Plaid variants with the refreshed 2021 body. Not compatible with pre-2021 Model S.” } }, { “@type”: “Question”, “name”: “Are both left and right side skirts included?”, “acceptedAnswer”: { “@type”: “Answer”, “text”: “Yes. The set includes one left-hand and one right-hand skirt. The weave pattern is mirrored between panels for perfect symmetry when viewed on the car.” } }, { “@type”: “Question”, “name”: “How are the ADRO Tesla Model S side skirts installed?”, “acceptedAnswer”: { “@type”: “Answer”, “text”: “Installation uses the included 3M adhesive tape and mounting hardware. The 3D-scanned fitment means no trimming or drilling is needed. Professional installation is recommended.” } } ]}{ “@context”: “https://schema.org/”, “@type”: “Product”, “name”: “Tesla Model S Plaid Facelift II Pre-Preg Carbon Fibre Side Skirts by ADRO (2021+)”, “description”: “ADRO pre-preg carbon fibre side skirts for Tesla Model S Facelift II 2021-2025. 3D-scanned OEM fitment, matched weave, CFD-developed profile. Pair supplied with 3M tape.”, “sku”: “ADRO-TMS-SS-PP”, “brand”: { “@type”: “Brand”, “name”: “ADRO” }, “image”: [“https://autoid.co/cdn/shop/products/tesla-model-s-adro-pre-preg-carbon-side-skirts-main.jpg”], “offers”: { “@type”: “Offer”, “url”: “https://autoid.co/products/tesla-model-s-pre-preg-carbon-fibre-side-skirts-by-adro-2021”, “priceCurrency”: “GBP”, “availability”: “https://schema.org/InStock”, “itemCondition”: “https://schema.org/NewCondition”, “seller”: { “@type”: “Organization”, “name”: “AUTOID” } }, “aggregateRating”: { “@type”: “AggregateRating”, “ratingValue”: “4.9”, “reviewCount”: “UPDATE_WITH_REVIEW_COUNT” }, “isCompatibleWith”: [ { “@type”: “Car”, “name”: “Tesla Model S Long Range 2021-2025” }, { “@type”: “Car”, “name”: “Tesla Model S Plaid 2021-2025” } ]}