BMW M5 LCI F90 Pre-Preg Carbon Fibre Performance Front Splitter Pro by FORM (2020-2023)
Description
The F90 M5 LCI gave BMW’s super-saloon a sharper face narrower laser headlights, redrawn kidneys, a more sculpted lower bumper. Form Industries’ Performance Front Splitter is the part that finishes the job. A three-piece setup centre blade plus dedicated left and right side splitters drops the nose visually, widens the front track, and pushes the LCI bumper into proper motorsport-derived territory.
Each piece is laid up in pre-preg carbon fibre with a 2×2 twill weave matched across all three components, so the weave alignment carries cleanly from one side of the bumper to the other. Pre-preg construction resin and cloth bonded under heat and pressure in an autoclave produces a part that’s lighter, stiffer, and dimensionally truer than wet-laid carbon, with a deep gloss finish that holds up against UV and weather.
The splitter was engineered specifically for the LCI bumper, not adapted from a pre-LCI part. The centre piece follows the revised lower air dam, the side blades pick up the redrawn corner intakes, and the three pieces sit together as a single resolved design no gapping, no awkward steps, no afterthought fitment.
Key features
- Three-piece design centre splitter plus matched left/right side splitters
- Pre-preg carbon fibre, 2×2 twill weave, autoclave-cured for tighter tolerances and longer-lasting gloss
- LCI-specific fitment engineered around the facelift bumper from the start
- Direct bolt-on installation, full hardware included
What’s in the box
- 1 x Form Industries Carbon Fibre (2×2 Weave, pre-preg) Centre Front Splitter
- 2 x Form Industries Carbon Fibre (2×2 weave, pre-preg) Side Splitters (Left and Right Side)
- Installation Hardware
Compatible models
- BMW M5 LCI (2020-2023, F90)
- BMW M5 Competition LCI (2020-2023, F90)
